Let’s say you have to maintain a vibrant landscape while optimizing water use. This incident starts with a proper functioning sprinkler system. A well designed system ensuresyour greenery thrives through efficient and sustainable water management.
Sprinklers require regular upkeep like any other mechanical system. It helps sprinklers to perform at their best. Even minor issues can lead to inefficiencies or skyrocketing water bills. This will result in declining plant health without proper maintenance.
So, how can you tell when you need a sprinkler repair service? And what is the best way to stay on top of irrigation maintenance?
Let us find out all these below.
Signs Hint Your Sprinkler Needs Repair
An effective sprinkler system is crucial to keep your landscape healthy and vibrant. But wear and tear can lead to inefficiencies and costly damage like other irrigation systems.
A commercial sprinkler system installation service provider also advises to monitor these signs.
Ignoring minor issues can result in
- dry patches
- water waste or
- rising utility bills.
It will save your time and hassle if you recognize the early warning signs of sprinkler system problems.
Let us discuss the signs below:
● Uneven Watering
It is a clear sign that you need a sprinkler repair service. This means that some areas of your landscape get more water than others.
A high quality irrigation system helps irrigate your lawn evenly. If this does not happen, then your system will not work as it was meant to. It can happen for
- broken sprinkler heads
- clogged nozzles or
- faulty valves.
● Low or High Water Pressure
Fluctuations in water pressure are another sign. If you are having problems with your sprinkler pressure, then the system may require repair.
Low water pressure can not deliver the right amount of water to your lawn. On the other hand, high water pressure can damage the sprinkler system.
Water pressure problems can provide inconsistent water coverage leading to water wastage. If sprinkler heads provide weak spray, then it shows low pressure. This can be for the leaks in the
- system
- faulty valves or
- sediment buildup in lines.
● Unusual Sounds during Operation
The sprinkler system should run quietly and smoothly. If you hear any whistling or gurgling noise coming from an irrigation system, then it shows mechanical problems in your system that need to be fixed.
● High Water Bills
Unusual increases in your water bills indicate issues with your sprinkler system. Leaks and damaged sprinkler heads can cause extra water use.
The irrigation system will start using more water for irrigation as it gets older. This will result in a high water bill.
Check your household appliances to make sure the problem does not come from the house. Inspect your sprinklers and tubing after confirming the issue is in the sprinkler.
Causes of Sprinkler System Damage
The damage can be a serious problem. We have mentioned some main causes of sprinkler damage below. Let us know about it in detail.
● Broken Sprinkler Line
It occurs when pressure is applied by compacting soil. Digging or burrowing animals can also cause a line breakage. Tree roots can grow and damage the line also.
A line breakage will impact at least 2 sprinkler heads. Be sure to note if 2 sprinkler heads have a lower water pressure or not. If the sprinkler heads contain no water then it indicates a broken line.
Put caps on sprinkler heads in the zone and run the system. Soggy and muddy soil in a specific spot is a sign of a broken line.
● Stuck Sprinkler Valves
Debris and small rocks sometimes block the valve in the sprinkler head from closing. Look for sprinkler heads that still run after you shut your system off. If the valve can not close, then the water can not be blocked.
● Burst Sprinkler Pipe
Sprinkler systems that are not properly drained before winter, can cause the pipes to freeze and burst. Pressure from frozen soil can also cause the problem.
Large puddles or ponding in your yard will be at the site of the burst.
How to Prevent Common Sprinkler Repairs
It requires a few simple but regular maintenance steps to keep your irrigation system in good condition. Follow the steps below and prevent getting a sprinkler repair service.
● Seasonal Checks
Regular seasonal maintenance helps keep your system in good shape, especially with changing weather.
Check each sprinkler head and clean off debris when winter ends. Make sure all heads function properly and make adjustments for even coverage. Test the controller settings to match your spring schedule.
Drain the system to prevent freezing before winter temperatures hit. Use compressed air to blow out water from the pipes. This prevents burst pipes or broken sprinkler parts in freezing conditions.
● Routine Cleaning and Adjustments
Constant upkeep can prevent larger issues from developing and extend the lifespan of your system. Leaves, soil, and lawn clippings can build up on sprinkler heads and clog them. It will block water flow also. Regular cleaning ensures a steady spray.
Check spray patterns to ensure your lawn gets full coverage each season. Adjust or replace sprinkler heads that appear misaligned or clogged.
● Pressure Monitoring
Keep water pressure at an optimal level. This will protect your sprinkler heads and ensure efficient water use.
Monitor water pressure to prevent damage to sprinkler parts and avoid excessive misting. Use a pressure gauge and check the pressure aligns with the recommendations in your irrigation system manual.
If you experience ongoing high pressure, then consider adding a regulator. It controls pressure and allows for balanced water flow and reduces strain on sprinkler heads.
Bottom Line
So? We hope you got a clear idea of the sprinkler repair process properly. Get a sprinkler repair service now and secure your landscape’s enduring health and beauty. Underground irrigation repair conserves water and reduces utility costs. So the sooner you do it, the more you save.
